Production Process:
a) Making the egg-shaped base
  • Measure the required amount of wax on a scale
  • Add white colorant
  • Melt the wax in a wax melter or water bath to a temperature of 80-85°C
  • While the wax is melting, cut the wick to the needed length (leave extra at the top) and thread it through the center of the mold using a needle
  • Heat the mold with a hair dryer
  • Pour the melted wax into the mold, securing the wick with a wick holder (don't fill to the edges)
  • Once the wax has slightly solidified, cut the wick and add more wax to hide the wick end
  • Leave the candle to cool completely, then remove it from the mold

b) Decoration
  • Cut out your preferred elements from paper (if you're using transfer paper)
  • Use water to moisten the paper layer and attach the element to the candle
  • Remove the paper layer with a napkin so that only the part with the image remains on the candle; if necessary, smooth the image using a napkin and your fingers
  • If you're using ready-made transfer tattoos or nail stickers, follow the instructions that come with them

c) Lacquer coating
  • After some time, pour lacquer into a cup and dip the candle in it; this action can be done 2-3 times
  • (If necessary, if you feel the candle doesn't have enough shine, you can repeat this procedure after several hours)
  • Blot the bottom of the candle to avoid drips and hang it with a clothespin to dry (approximately for a day or at least overnight); after 30-60 minutes of drying, blot the bottom again.
Easter eggs
(Нажмите, чтобы открыть урок)
Подробно про инвентарь вы можете посмотреть в уроке “Стартовый набор”.

Открыть
In this lesson, we will make Easter eggs
Open
What we will need to make:

1) Bleached beeswax
2) Silicone mat
3) Waxed wick
4) Kitchen thermometer
5) Wax melter or water bath containers
6) Dye
7) Stack with balls (bulka)
8) Spoon
9) Knife
10) Office knife (scalpel)
11) Needle or thick needle
12) Mold for the center
13) Ranunculus Cutter and Liner Set
14) Universal viner with a width of 5 cm or more
Смотреть версию из Архива - Открыть